ELMAG gear drilling and milling machines

GEM-400 G

milling - drilling - thread cutting
face and taper-bore turning - keyhole saws
horizontal drilling - grinding

machine head can be turned and swivelled 180°
right-stop-left-switch = easy operation
motor with 2 different speeds (1420/2840 RPM)
hardened and polished toothed wheels running in an oil bath
quiet run less than 76 dB(A)
micro precision feed with scale for accurate milling
adjustable drilling depth stop with mm and inch scale
high-speed drilling pilot wheel with return spring
spindle sleeve and coordinate compound table can be fixed
lowest speed only 50 RPM (!)
thick-walled, rolled steel column makes it extremely solid and accurate
continuous drilling shaft: draw-in spindle for clamping rings
table made of fine-grained grey cast, surface has been smoothened with high accuracy
T-slots 16 mm
milling table with scale for quick and precise adjustment
solid machine pedestal made of cast for a vibrationless operation
speed can be selected quickly and easily with the toothed gearing - without fan belts

Specifications:	GEM-400 G
column diameter	110 mm
Morse cone no.	MK 3
reach	275 mm
drilling depth	120 mm
drilling output (cast/steel)	40/32 mm
milling output with endmilling cutter	max. 32 mm
milling output with front miller, face miller	max. 76 mm
milling table: dimensions	730 x 210 mm
longitudinal feed	410 mm
lateral feed	285 mm
12 speeds, clockwise and anticlockwise rotation	50/110/190/380/670/1250 RPM 100/220/380/760/1240/2500 RPM
drilling head: vertical travel	550 mm
swing range	180°
turning range	180°
engine output	0.75 kW/1 HP, 400 Volt
weight	310 kg
EAN / Article number	90 04853 82100 4 prices and availability

Optional accessories upon inquiry:

GEM-400 GCT

milling - drilling - thread cutting
face and taper-bore turning - keyhole saws
horizontal drilling - grinding

machine head can be turned and swivelled 180°
right-stop-left-switch = easy operation
motor with 2 different speeds (1420/2840 RPM)
hardened and polished toothed wheels running in an oil bath
quiet run less than 76 dB(A)
micro drilling depth feed with clutch
micro precision feed with scale for accurate milling
adjustable drilling depth stop with mm and inch scale
high-speed drilling pilot wheel with return spring
spindle sleeve and coordinate compound table can be fixed
lowest speed only 50 RPM (!)
thick-walled, rolled steel column makes it extremely solid and accurate
continuous drilling shaft: draw-in spindle for clamping rings
table made of fine-grained grey cast, surface has been smoothened with high accuracy
T-slots 16 mm
milling table with scale for quick and precise adjustment
solid machine pedestal made of cast for a vibrationless operation
speed can be selected quickly and easily with the toothed gearing - without fan belts

Specifications:	GEM-400 GCT
column diameter	110 mm
Morse cone no.	MK 3
reach	275 mm
drilling output (cast/steel)	40/32 mm
milling output with endmilling cutter	max. 32 mm
milling output with front miller, face miller	max. 76 mm
milling table: dimensions	730 x 210 mm
longitudinal feed	410 mm
lateral feed	285 mm
12 speeds, clockwise and anticlockwise rotation	50/110/190/380/670/1250 RPM 100/220/380/760/1240/2500 RPM
drilling head: vertical travel	550 mm
swing range	180°
turning range	180°
drilling depth	120 mm
engine output	0.75 kW/1 HP, 400 Volt
weight	325 kg
EAN / Article number	90 04853 82102 8 prices and availability

Optional accessories upon inquiry: